Oklahoma City metro · on site
The booth comes to you.
Without the mess.
We bring a 300W laser to the steel. No haul. No grit. Dry and ready to coat.
Shop photos from the bench. Film is a live rust pass.
The booth comes to you.
Your car stays put.
Frames and parts stay in the bay. No force, no warp, no grit in the seams.
Your car stays put.
We bring the 300W unit to the garage or shop. The part does not leave.
Skip the blast tax.
You don't haul the car. You don't sweep grit out of the seams. We come to the steel.
Sandblasting looks cheap by the hour. The real bill is containment, media you cannot recycle on a driveway, and a second wash because grit lodges in seams, threads, and pores. That leftover grit is what makes new paint fail.
Laser uses light, not media. The surface is left dry and ready to coat or weld. No tarp farm. No dumpster of spent slag. Hourly rates in this trade often sit in the same neighborhood as blasting. You pay to skip the cleanup.
No media to dump
No bags, no tarp farm, no dumpster of slag. Light residue only.
Mobile
The 300W cart comes to the garage or shop. Parts that cannot move stay put. You do not lose a day to trailering.
No grit in the seams
Blasting packs grit into threads, box sections, and pores, and that leftover grit is what makes new paint fail. Laser leaves none. Coatings bond to clean metal, not slag.
Steel left
No grinding wheel, no media stream, no force. Thin panels do not dish. Rust and paint leave. Dimensions and base metal stay.
Skip the blast tax.
Haul, media, grit in seams, and a second wash. That is the tax. Laser skips it.
How the laser works on site
Light lifts rust and paint. Steel stays. The part is dry when the pass is done.
Settings change with the job: pulse, scan speed, and energy. Heavy mill scale is not the same as thin body paint. Corners, studs, and threaded holes are reachable because there is no blast hose cone and no media bounce.
We roll in a 300W portable unit. No drying time. No chemical soak. Fume extraction sits on the head. When the pass is done, the part is dry and you can coat, weld, or assemble.
Light, not grit
The beam lifts the coating. No force on the panel. No base metal lost.
Tuned per surface
Rust, mill scale, and paint take different pulse, scan, and energy settings. We tune per surface. We do not guess one power for everything.
Small footprint
The unit fits a shop aisle or a garage bay. Setup is the cart, power, and extraction. Not a blast booth, a containment tent, and a media dumpster.
How the laser works
Light lifts rust and paint. Steel reflects most of the energy. The part stays dry.
What we strip
Rust, mill scale, and paint on metal. Cement, graffiti, and wood on request.
Rust
Oxidation off frames, plate, tools, and equipment. Corrosion leaves. Dimensions stay. Dry, media-free metal, ready for weld or coating.
Mill scale
Mill skin off new plate and parts so weld and paint stick. The prep a wheel or a blast cabinet does, without the dust cloud or the cleanup.
Paint
Primers, coatings, and failed paint lift in controlled passes. Layers come off without grinding through the steel or packing grit into seams. The surface is left dry and ready to coat.
Cement and graffiti
Paint and stain off masonry without a chemical wash. No chemicals. No media. We come to you.
Wood strip
Old finish off wood without a sanding cloud. Grain stays. Ask first. Not every board is a fit.
What we strip
Rust, mill scale, and paint on metal lead. Cement, graffiti, and wood strip on request.
Oklahoma City metro · on site
Ready when you are.
Tell us the part, the coating, and where it sits. We call back to scope it.
We bring the 300W unit to your garage or shop. Power and access get sorted on that call. If laser is the wrong tool, you hear that before we roll.
OKC Laser Cleaning is a BidZap LLC service.
QUOTE
Get a quote
Name, phone, job type, notes. We call back to scope it.